Linear cascade - Globe Thesis

Keyword [Linear cascade] Result: 1 - 16 \| Page: 1 of 1
1.	Finite Difference Method Based Large Eddy Simulation Of Compressible Flow
2.	Numerical Analysis Of The Influence About Wake To Compressor Cascade Flow Field
3.	Numerical And Experimental Study Of Corner Separation In A Compressor Stator Cascade Based On CDA Blade Profile
4.	Investigation Of Turbine Cascade Tip Clearance Control Uising Blade Tip Winglets
5.	High-lift Low Pressure Turbine Blade Linear Cascade Test
6.	Studies For The Influence Mechanism And Drag-reduction Method Of Surface Micro-topography On The Performace Of Linear Cascade
7.	Three-dimensional Aerodynamic Design And Experiment Investigation Of Transonic Compressor Stator
8.	Influence Of Elliptic Tubercle Leading Edge Blade Modification In Linear Compressor Cascade
9.	Influence Of Bump Modeling Methods On The Aerodynamic Performance Of Transonic Compressor Cascade
10.	Control of the tip-gap flow of a low pressure turbine blade in a linear cascade
11.	Near wall behavior of vortical flow around the tip of an axial pump rotor blade
12.	Heat transfer measurements on an incidence-tolerant low pressure turbine blade in a high speed linear cascade at low to moderate Reynolds numbers
13.	Local measurement and numerical modeling of mass/heat transfer from a turbine blade in a linear cascade with tip clearance
14.	Unsteady flows in a two-dimensional linear cascade with low-pressure turbine blades
15.	Vane separation control in a linear cascade with area expansion using AC DBD plasma actuators
16.	Research On Experiment And Loss Control Mechanism For Tandem Cascades
<<First <Prev Next> Last>> Jump to