Open loop control - Globe Thesis

Keyword [Open loop control] Result: 1 - 20 \| Page: 1 of 2
1.	Research On The Drive System And Control Method For Nano-table With Six Degrees Of Freedom
2.	Study On The Drive Control System Of Linear Pulse Motor (LPM)
3.	Study On LPG Electric Control Injection System For Minitype Engine
4.	Study On The Control Theory And Technology Of The Global Vision Guided AGV
5.	A Design Of Crane Anti-Sway Controller
6.	Research On Electronically Supplying Air Technology Of ZS157YMI Engine For Euro.Ⅲ Standard And Conformity Of Mass Production
7.	Research On Fine Control Mode For Manipulator Of Loader
8.	Intelligent Mine Structure And Control System Design
9.	Research On Dynamic Voltage Restorer Based On Three Single-phase H Bridge
10.	Active Vibration Suppression Based On Component Synthesis Method For The Satellite With Double Flexible Sail
11.	Research Of Asynchronous Motor Direct Torque Open-loop Control
12.	Research On Control Strategies Of Modular Multilevel Converter
13.	Research On The Calibration Method For Gear Shifting Of High-Power Automatic Transmission
14.	The Measurement And Control System Of Double Drive Piezoelectric Platform
15.	Study On The Principle Of Open-loop Control Of Synchronization With Speed-control And High-precision In The Condition Of Large Eccentric Loads
16.	Numerical Simulation Of The Aeroelastic Response Of Aircraft In Maneuvering State Using CFD/CSD Coupling Method
17.	Research On Servo Control Technology Of Two-phase Hybrid Stepping Motor
18.	Design And Performance Analysis Of Stepping Motor Control System For Automobile Instrument
19.	Redundancy Theory And It's Application In Tensegrity Dome Comprised Of 3-Bar Prisms
20.	Fuze High Accruacy Dynamic Open-Loop Control Technology Based On Simultaneous Power And Information Transfer
<<First <Prev Next> Last>> Jump to