Font Size:
a
A
A
Keyword [Operating Conditions]
Result: 181 - 200 | Page: 10 of 10
181.
Power losses in the lubricating gap between cylinder block and valve plate of swash plate type axial piston machines
182.
Parametric analysis of externally fired combined cycle power generation systems
183.
System level modeling and component level control of fuel cells
184.
Heat transfer investigations in a circulating fluidized bed combustor
185.
Extension of the nondimensional tire theory to general operating conditions
186.
Effects of Inflow Parameters and Operating Conditions on the Structural Response and Power Production of a Commercial Wind Turbin
187.
Detection of rotor and load faults in brushless DC motors operating under stationary and non-stationary conditions
188.
Dynamic Braking Control for Accurate Train Braking Distance Estimation under Different Operating Conditions
189.
Analysis of an Open-Cathode Fuel Cell Stack in an Enclosure for Varying Operating Conditions
190.
Experimental measurement and analysis of in-cylinder fuel-air mixing and combustion using an optical DI Diesel engine under realistic operating conditions
191.
Breakup characteristics of a liquid jet in subsonic crossflow
192.
Experimental investigation of PAH formation in diesel engines and model development
193.
Control of Aircraft Operating Under Adverse Conditions
194.
Analysis and control of three phase ac/dc pwm converter under unbalanced operating conditions
195.
Electro-thermal model for a solid oxide fuel cell
196.
Supersonic jet noise prediction and noise source investigation for realistic baseline and chevron nozzles based on hybrid RANS/LES simulations
197.
Coil frosting and defrosting in industrial freezers operating near saturated conditions
198.
Design of a Test Loop for Performance Testing of Steam Turbines Under a Variety of Operating Conditions
199.
Phase frame analysis of wind turbines in unbalanced distribution system
200.
Lyapunov-based control of unbalanced pulse-width modulation boost type rectifiers
<<First
<Prev
Next>
Last>>
Jump to
