Font Size: a A A
Keyword [Phases]
Result: 1 - 20 | Page: 1 of 10
1. A Study Of Negtive And Zero Sequences Current Compensated And Controlled In Transmission Lines Operated In Two Phases
2. Numerical Simulation And Experiment Study On Flood Discharge And Energy Dissipation Of High Dam With Large Discharge
3. Study On Measurement Of 3D Photography In Aero Engine Vane
4. Numerical Simulation Of Interior Flow Of Jet Pump To Use Monte Carlo Method
5. Study On Mechanochemistry Effect Of Mineral Phases Grinding Of Cementbased Material And Fractal Theory
6. Theoretical Study On The Infrared Absorption Spectrum And Cu-O Bond Vibration,Energy Of CuO2 Plane Of Bi-System High Temperature Superconductor
7. Study On Method Of Temperature And Moisture Controlling For Crack Preventing Of Hydraulic Concrete
8. Theoretical And Experimental Analysis And Design Application On Surrounding Rock Resistant Coefficient For Large-span Undersea Tunnel
9. Study On The Soft Starting And Saving Energy Technology For Three Phases Induction Motor
10. Numerical Investigation Of Heat And Mass Transfer In Multiple Phases And Components Flows Using Lattice Boltzmann Method
11. Research Of Anti-Magnetic-Field Interference Technique And Digitized Technique Based On Optical Current Transduer
12. Investigation On CuW/CuCr Integrated Electrical Contact Materials For Ultrahigh Voltage Interrupters
13. Modeling And Simulation Of Concrete Pump Truck Arm System Based On Flexible Multi-Body Dynamics
14. Fire Resistance Of Reinforced Concrete Restrained Members During Heating And Cooling Phases
15. Design And Research Of Six Phases Fault Tolerant Permanent Magnet Motor And Its Control System
16. Research On The Force Charecteristics Of High Superconductor Magnet Under Linear 3-phases Windings
17. Research On The Model And Characters Of The High Frequency Chopped Wave Cascade Speed Control System For The Asynchronous Motor
18. Research On The Dynamic Reliability Of Electrified Railway Catenary System Subjected To Environmental Loads
19. The Designing And Realization Of The Programmed Calibrator Of Three Phases Watt-hour Meter
20. The Main Circuit Topology Of Novel Unified Power Flow Controller And Its Application Study In Two Phases Operating
  <<First  <Prev  Next>  Last>>  Jump to