Font Size:
a
A
A
Keyword [Punch]
Result: 1 - 20 | Page: 1 of 3
1.
A 3-Dimensional RITSS Large Deformation Finite Element Method And Its Application On The Foundation Punch-through Failure And Plate Anchor Uplift Resistance Problems
2.
Study On Strength Parameter Of Hard Structural Plane And Engineering Technique For Consequent Slope
3.
Establishment Of MSP And Its Application In PZT Ceramics Under Multiple Coupling Field
4.
Experimental And Applied Study On Raft Foundation Reinforced By Steel Fiber
5.
Analysis Of The Simulation For Stamping Forming Process Of Motorcycle Tank
6.
Experimental Material Characterization Of Light Weight Al-structures And Simulation Of Welded Structures In The Automotive Industry
7.
Optimization Design And Analysis For The Plate Manufacture Machine Based On Finite Element Technology
8.
Bearing Capacity Study Of Spudcan In Two-Layer Clay By Numerical Computation Method
9.
Design Of Engine Exhausting Filter And Analysis Of Crash Simulation
10.
Research And Development Of Computer Aided Packing System For Mechanical Manufacture
11.
Research On Environment Vibration Induced By Bridge Pile Foundation Construction
12.
Research On Punch Mode Structural Design Of Automobile Panel
13.
Research On Optimization Scheduling Of Chang'an Suzuki Punch Lines
14.
Research On The Process Of Semi-circular Shape Crane Boom And Computer Simulation
15.
Engine Components For Turbine Punch Combination Design Method And Flow Field In Value Research
16.
Research On Life Assessment Method Considering Constraint Effect For P92Pipe With Defects At Elevated Temperature
17.
The Method To Obtain Creep Parameters By Single Curve Of Small Punch Creep Test
18.
Research On The On-line Small Punch Tests Device And Its Experimental Investigation
19.
On Ultimate Bearing Capacity Of Jack-up With Square Spudcan And Application To Structure Investigation Against Punch-through
20.
Research On Risk Assessment Method Of Jack-up Drilling Unit
<<First
<Prev
Next>
Last>>
Jump to
