Reynolds - Globe Thesis

Keyword [Reynolds] Result: 21 - 40 \| Page: 2 of 10
21.	Lattice Boltzmann Method For Bluff Body Aerodynamics
22.	Research On Dynamic And Tribological Characteristics Of Hard Disk Drives During Load Unload And Shock Process
23.	Influence Of Tip Clearance On Micro Turbine Cascade Flow And Research On Backward Vortex Control Of Blade Tip Flow
24.	Investigation On Flow And Heat Transfer Characteristics In Low Pressure Turbine Of Aeroengine
25.	The Static And Dynamical Research And Simulation Of Journal Bearings
26.	A Study Of Low-Reynolds-Number Performance Over A Two-Dimensional Airfoil For Micro-Air Vehilce
27.	Aerodynamic Investigation Of Flow Characters Of Internal Cooling Channel With Both Rib-roughened Walls And Film Hole Suctions
28.	Numerical Research Of The Narrow Spiral Groove Seal Performance
29.	Experimental Investigation On The Characteristics Of Flow At Low Reynolds Numbers In Mini-channels
30.	Investigation Of Film Cooling On The Surface Of Blade In A Turbine Cascade
31.	Model Test And Numerical Simulation For Swirling Flow Of Inner Dissipator With Shaft Inlet
32.	Analysis Of The Dynamic Performance And The Stability Of Liquid-lubricated Herringbone Grooved Journal Bearing (HGJB) With Micro-polar Lubricants
33.	Experimental And Numerical Study On The Mechanism Of The Reducing Pressure Drop Stick In Cyclones
34.	Experimental Study On The Characteristics Of Reynolds Stress In Open Channel Flow
35.	Study On Microfluidic Mixing Efficiency Under Low Reynolds Number
36.	Heat Transfer Enhancement Research Of Heat Exchangers With Longitudinal Flow Of Shell-side Fluid Under Low Reynolds Number
37.	Critical Speed Calculation Of Rotor-Bearing System Of Centrifugal Compressor
38.	Study On Compressibility And Viscosity Of Traffic Flow
39.	Numerical Experimental Research On The Vortex Shedding Characters Of A Three-dimensional Circle Cylinder
40.	The Initial Exploration How The Coming Flow And Wing Flapping Mode Influence The Aerodynamic Parameters Of Micro Aerial Vehicles
<<First <Prev Next> Last>> Jump to