Wall Film - Globe Thesis

Keyword [Wall Film] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Intake-port Wall-film Of Motorcycle Gasoline Engine With Intake-port Injection System
2.	Research On Heat Transfer Of Flame Tube Wall With Multi-inclined Holes And Development Of Software On Wall Temperatures Design With 1d Method
3.	Experimental Investigations Of Coolant Injection Effects On Internal And External Flow Characteristics Of Turbine Blade
4.	Foundmental Research On Reducing Agent Adding Process Of Urea-SCR Systems For Diesel Engines
5.	Optimization Design Of Centrifugalbreather Of Aero Engine Based On CFD
6.	Numerical Study Of Spray Impingement And Wall-Film Evaporation In The Combustion Engine
7.	The Test Rule And Numerical Simulation Methods Of The Simultaneous Action Of Wind And Rain
8.	Numerical Study Of Wall-film Evaporation In The Internal Combustion Engine
9.	Properties Of Oil Film And Its Effects On Soot Emission Under The Cold Start Condition Of Direct Injection Gasoline Engine
10.	Research Of Compressor Wet Compression Performance And Water Droplet Motion
11.	Investigation Of Wall Film And Fuel-air Mixture Distribution Characteristics During Spray-wall Impingement Process
12.	Study Of Characteristics Of Fuel Spray Impingement,Film Dynamics And Vaporization
13.	Experimental Investigations On The End Wall Film Cooling At Large Temperature Ratio And Combination Cooling With Film Hole And Vortex
14.	The Numerical Investigation On The Form Of Blade Water Film And The Performance Of Rain Ingestion Process Of A Compressor
15.	Study On Modelling Turbulent Wall Heat Flux And Wall Film Heating Inside Diesel Engine Cylinder
16.	Effects Of Wall Film On The Unburned HC And Soot Emission Of A Direct Injection Gasoline Engine With Cold Start
17.	Characteristics Of Spray Atomization And Wall Film Cooling Of Bi-component Mixtures
18.	Modeling And Experimental Study Of Unsteady Adhered Wall Film Evaporation In Internal Combustion Engines
19.	Study On Evaporation Characteristics Of Fuel Film Attached To Wall Under Different Wetting Characteristics
20.	Investigation On The Spray-wall Impingement Characteristics Of GDI Elliptical Nozzle
<<First <Prev Next> Last>> Jump to