Font Size: a A A
Keyword [anisotropic]
Result: 181 - 200 | Page: 10 of 10
181. Experimental Investigation And Constitutive Modeling Of Anisotropic Sand Under Complex Static And Cyclic Loading Conditions
182. Research On PIV Optical Flow Algorithms In Hypersonic Flows And Its Applications
183. Analytical Method For Stress Analysis Of The Opening Anisotropic Structures
184. Study On The Characteristic Analysis And Optimization Method Of The Orthogonal Magnetic Flux Coupled High Temperature Superconductivity Controllable Reactor
185. Preparation,structure And Magnetic Properties Of Anisotropic Bulk Smco7-Type Nanocomposite Permanent Magnets
186. Subsequent Yield Behavior Of HRB400E Steel Under Tension-torsion Combined Loading And Anisotropic Yield Surface Model
187. Investigation Of CMC's Thermal Conduction Mechanism And Its Application In Thermal Analysis For Turbine Vane
188. Constitutive Relationships Of Anisotropic Sands Under Fixed Principal Stress Axes Shearing
189. Anisotropic Fracture Model For The Failure Prediction Of Advanced High Strength Steel Sheets
190. UH Model Based On The Anisotropic Transformed Stress Method And Its Application
191. Research On Tangential Static And Dynamic Characteristic Parameters Of Anisotropic Contact Surfaces
192. Dynamic Mechanical Analysis Of Asphalt Pavement Based On Cross-anisotropic Properties
193. Study On The Small Strain Shear Modulus And Shear Characteristics Of Anisotropically Overconsolidated Wenzhou Clay
194. Study On Consolidation Of Saturated Soil With Internal Heat Sources Considering Permeability Anisotropy
195. Hypoplastic Model And Discrete Element Simulation Of Anisotropic Sand
196. Study On Small-strain Dynamic Properties Of Sand In Anisotropic Consolidation
197. Research On Bearing Capacity Of Non-homogeneous And Anisotropic Foundation Adjacent To Slope
198. Near Field Radiative Heat Transfer Between Parallel Plates With Flat And Rough Surfaces
199. The Preparation And Study Of Anisotropic (Nd,Pr)2Fe14B/?-Fe Nanocoposite Magnets
200. Reseach On Anisotropy And Buckling Of 3D Printed Honeycomb Structures With Experimental Verification
  <<First  <Prev  Next>  Last>>  Jump to