casing - Globe Thesis - Globe Thesis

Keyword [casing] Result: 181 - 200 \| Page: 10 of 10
181.	Numerical Simulation Of The Flow Field And Aerodynamic Noise And Experimental Study For A High Pressure Ratio Marine Turbocharger Compressor
182.	Research On The Dynamic Characteristics Of Rotor Blade Based On LS-DYNA
183.	Conjugate Heat Transfer (CHT) Of Combined HIP Steam Turbine Casing In CCPP
184.	Study Of Finite Element Method For Rotor-casing System Vibration Charateristic Analysis
185.	Research And Integrated Design Of Bolted Joint For Aero-engine Compressor Casing
186.	Characteristics Of The Casing Is Installed In The Gas Side And Axial Forces Acting
187.	Research On Sealing Charateristics Of An Aeroengine Typical Flanged Casing Structure
188.	Study Of The Stiffness Of Aeroengine Casing With Bolted Joints
189.	Analysis Of The Blade Vibration Based On The Casing Vibration Signal
190.	Optimization Design For High Pressure Turbine Casing Typic Structure Based On Thermal-structural Coupling Analysis
191.	Flow Spoiling Mechanism And Cold Pressure Connection Approach Of Hollow Tetrahedron
192.	Stress Charactersistics Of Steel Casing Rock-socketed Pile And Contact Supports Joints In Inland Overhead Vertical Wharf
193.	Efficient Processing Research And Practice About Aero-engine Casing
194.	Research On Bearing Capacity Of The Wharf With Steel Casing Reinforced Concrete Pile Based On The Theory Digital Speckle
195.	Analyze The Application Of Customize Services In The Design Of Ceramic Casing
196.	Research On Vibration Of Air Conditioner Axial Flow Fan Without Volute Casing Based On One Way Fluid Structure Interaction
197.	Investigation Of Transonic Compressor Rotor Performance Affected By The Circumferential Casing Groove With Suction
198.	The Construction Technology Research Of Bored Pile By Full Steel Casing And Reverse Circulation Drill(RCD)
199.	Numerical Study Of The Effect Of Casing Treatment On Compressor Tip Clearance Flow
200.	Analysis Of The Vibration In High-head Francis Turbine Caused By Rotor-stator Intercation
<<First <Prev Next> Last>> Jump to