cohesive zone model - Globe Thesis

Keyword [cohesive zone model] Result: 21 - 40 \| Page: 2 of 6
21.	Analysis Of Bond Performance Between FRP And Brick With Cohesive Zone Model
22.	Research On Cyclic-temperature Aging Characteristics Of Adhesive Structure
23.	Predicting The Strength Of Adhesively Bonded T-joints Under Cyclic Temperature Using A Cohesive Zone Model
24.	Study On Crack Sealant Interface Mechanical Response Under The Action Of Transient Tempreture Field And Wheel Load
25.	Research On Mechanical Properties Of Single-lap Joint Under Salt Spray Environment
26.	Study On Generate Rules And Influence Of Interface Connection Damage Of The CRTSâ…¡ Slab Track
27.	Numerical Simulation Of Asphalt Concrete Specimen Cracking Process Based On The Microscopic Material Interface Features
28.	Experiment And Simulation For Ti/PEEK Interfacial Fracture Toughness Of Ti/PEEK/C_f Laminates
29.	Damage Analysis Of Cement Asphalt Mortar Layers Interface For CRTSâ…¡Ballastless Slab Track
30.	Study On Asphalt Mixture Splitting Test Using Cohesive Zone Model And Three-Dimensional Discrete Element Method
31.	Research Of The Temperature-dependent Mechanical Property Of Adhesive Interface Between EPDM Films
32.	Research Of The Mode I Interfacial Debonding Property Between CMDB Propellant/EPDM Inhibitor Film
33.	Investigation On Friction Contact Model Of Cushion And Concrete And Its Application In Shield Tunneling
34.	A Study On The Effects Of Residual Stress On Fretting Fatigue Of The Engine Block
35.	Research On The Mesoscopic Damage Mechanism And Nonlinear Viscoelastic Constitutive Model Of Composite Propellant
36.	Numerical Analyses Of The Effective Bonding Length Of Bolts Based On A Cohesive Zone Model
37.	Research On Law Analysis Of Pre-splitting Cracks Cracking Of CRTSⅡ Slab Ballastless Track
38.	Study On The Design And Mechanism Of Polyurea Composite Impervious System
39.	Strength Analysis And Improved Design Of Composite Horizontal Central-wing
40.	Dynamic Analysis Of Contact Characteristics Between The Film/substrate And Micro-cantilever With A Rough Surface
<<First <Prev Next> Last>> Jump to