Font Size:
a
A
A
Keyword [cold-formed steel columns]
Result: 1 - 19 | Page: 1 of 1
1.
Experimental And Design Method Study On Cold-formed Channel Steel Columns With Section Thickness Less Than 2mm Under Axial Compression
2.
Finite Element Nonlinear Analysis On Distortional Buckling Of High Strength Cold-Formed Steel Columns
3.
Experimental And Theoretical Research On Axial Compression Bearing Capacity Of Three Limbs Open Section Built-Up Cold-Formed Steel Columns
4.
Research On Bearing Capacity Of Quadruple-C Built-up Section Cold-formed Steel Columns Under Axial Compression
5.
Researches On The Direct Methods In Calculating Vertical Capacity Of Cold-formed Steel Columns
6.
Bearing Capacity Research On Cold-formed Steel Tubes Encased Concrete Stub Pier
7.
Research On Axially Compressed Behavior Of Quadruple-limbs Double Box Section Built-up Cold-formed Steel Columns
8.
Research On Axially Compressed Behavior Of Triple-limbs Half-open Section Built-up Cold-formed Steel Columns
9.
Research On The Axially Compression Behavior Of Triple-Lambs Built-up Open T-Section Cold-formed Steel Columns
10.
Research On Axially Compressed Behavior Of Double Limbs Box Section Bulit-up Cold-formed Steel Columns
11.
Research On The Axially Compressed Behavior Of Triple-limbs Box Section Built-up Cold-formed Steel Columns
12.
Research On The Compression Behavior Of Sextuple-limbs Section Built-up Cold-formed Steel Columns
13.
Research On Compressed Behavior Of Double Limbs Closed Section Bulit-up Cold-formed Steel Columns
14.
Study On Interactive Buckling Of The Channel-Section Cold-Formed Steel Columns Under Axial Compression
15.
Research On Unified Calculation Method Of Critical Load And Ultimate Load For Pin-and Fix-end Columns Exhibiting Pure Distortional Buckling
16.
Axial Compression Design Method Of Cold-formed Steel Columns With Holes In Web And Its Effect On Shear And Insulation Performance Of Composite Walls
17.
Study On Local Buckling Of Cold-formed Steel Columns Under Axial Compression After High Temperature
18.
Stability Bearing Capacity Of Thin-walled Cold-formed Steel Columns With Complicated Crimping And Unequal Angle Cross-section Under Eccentric Compression
19.
Distortional Behavior Of Cold-formed Steel Columns Reinforced By Channel Sleeve Under Axial And Eccentric Compression
<<First
<Prev Next>
Last>>
Jump to