Font Size:
a
A
A
Keyword [equivalent plastic strain]
Result: 1 - 13 | Page: 1 of 1
1.
Study On Stability Analysis Of Three-Dimensional Slopes And Gravity Dams
2.
Study On Stability Analysis Of Rock Slope And Its Reinforcement Design
3.
Pile - Bucket Foundation Uplift Loading Model Under Test And Finite Element Analysis
4.
Stainless Steel Cold-formed Square Steel Residual Stress And Its Impact On The Ultimate Load Analysis
5.
The Heat Load Of A Gasoline Engine Exhaust Manifold
6.
Research On The Safety Performance Of Engine Hood And Joint Point
7.
The Effect Of The High-speed Train Wheel Polygonal Wear On The Plastic Deformation Of The Rail
8.
The Simulation And Optimization Study Of Surface Nanocrystallization Technology Of 42 CrMo Steel For Automobile Shafts Via High Energy Shot Peening
9.
Fracture Behavior Test And Finite Element Study Of Welded T-stub Of High Strength Steel
10.
Investigation On Turbocharger Housing And Bracket Fatigue Failure Problem
11.
Study On Compressive Bearing Capacity Of Tubular T-Joints With Different Degrees Of Damage Reinforced By CFRP
12.
Study On The Bearing Capacity Of Tubular Damaged T-joints After Strengthed By Collar Plate
13.
Study On Dry Contact Abrasive Wear Based On Metal Friction Pairs
<<First
<Prev Next>
Last>>
Jump to
