fin structure - Globe Thesis

Keyword [fin structure] Result: 1 - 20 \| Page: 1 of 2
1.	Research On Impact Of Structural And Installation Angle On Heat Transfer And Pressure Drop Characteristics Of Parallel Flow Evaporator
2.	Research On Influence Of Longitudinal Fin On Resistance And Heat Transfer Characteristic In Fin Tube
3.	Wavelet Decomposition Method Decoupled Boiling/Evaporation Instability Mechanisms Over Two To Three Timescales:a Study For A Microchannel With Pin-fin Structure
4.	Numerical Simulation On The Optimization Of Fin Structure In Automotive Heat Exchangers
5.	Analysis Of Wind Load And Wind-induced Vibration Of Shutter Fin Structure
6.	Optimization And Analysis Of Automobile Exhaust Waste Heat Thermoelectric Generation Device
7.	Wind Buffeting Noise Research On Side-Window Combination Under High Speed
8.	Equivalent Homogeneous Strength Design Of The Plate-fin Heat Exchanger
9.	Study On The Equivalent Creep Rate And Life Of 316L Stainless Steel Plate Fin Structure
10.	Numerical Study On Heat Transfer Enhancement Of Turbine Blade With Internal Fin Structure
11.	Research On Calculation Method Of Heat Transfer Performance Of Automobile Radiator And Optimization Of Fin Structure
12.	Performance Analysis And Optimization Of Gas Heating Water Heater Based On Pin Fin Structure
13.	Heat transfer and pressure drop in flows perpendicular to an offset fin structure
14.	Study On Heat Transfer Performance Of Sugar Alcohol Based Phase Change Heat Storage
15.	Application And Optimization Of Fin Structures In Air Cooling And Heat Management System Of Columnar Power Battery
16.	Study On Fin Structure Optimization And Heat Transfer Characteristics Of Phase Change Of Heat Storage Unit
17.	Heat Transfer Research And Structure Optimization Of Triple-tube Latent Heat Storage Unit
18.	Design And Optimization Of Fin Structure In Phase Change Heat Storage System
19.	Study On Structure Optimization Of Heat Exchanger And Heat Transfer Enhancement By Internal Flow Field In Segmented Asymptotic Thermal Power Generation System
20.	Variable Cross-section Heat Transfer Enhancement Surface Design And Experimental Studies Based On Additive Manufacturing
<<First <Prev Next> Last>> Jump to