Font Size: a A A
Keyword [impact loading]
Result: 141 - 160 | Page: 8 of 9
141. Dynamic response and design of support elements in rockburst conditions
142. Three-dimensional, inelastic response of single-edge notch bend specimens subjected to impact loading
143. Finite element analysis of reinforced concrete structures under impact loading
144. Uniaxial response of reinforced concrete to impact loading
145. AN ANALYSIS AND EVALUATION OF THE DYNAMIC FLOW FUNCTION OF METALS UNDER IMPACT LOADING (STRESS, HIGH STRAIN RATE)
146. The dynamic response of concrete filled FRP tubes subjected to blast and impact loading
147. Research On Dynamic Behavior Of FRP Confined Square Concrete Filled Steel Tube Under Axial Impact Loading
148. Static And Dynamic Compressive Behaviors Of Porous Structures Based On Triply Periodic Minimal Surface
149. Dynamic Response And Damage Deformation Of Preloaded Reinforced Concrete Slabs Under Impact Loading
150. Comparative Study On Dynamic Response Of Square Section RC-Members And CFRP-Reinforced Members Under Impact Loading
151. Behaviour Of Stiffener-enhanced Steel-concrete-steel Sandwich Panels With Nested Tube Subjected To Impact Loading
152. Performance Analysis Of New Containment Structure Under Pressure Seismic Coupling And Impact Load
153. Study On Dynamic Response Of Cable-membrane Structure Under Impact Load
154. Study On The Dynamic Response Of Steel Beam And ?-shaped Column Under The Presence Of Pre-loading
155. Transient Response Of Pre-stressed Steel Strand When Subjected To Impact Loading
156. Numerical Simulation Of Dynamic Behavior Of Microcapsule Based Self-Healing Cementitious Composites Under Impact Loading
157. Research On Dynamic Compressive Properities Of Ceramsite Concrete Affected By Freeze-Thaw Cycle Conditions
158. Numerical Simulations And Energy Dissipation Characteristics Of Frozen Soil With Prefabricated Holes Under Impact Loading
159. Mechanical Response And Microstructure Analysis Of Structural Clay Under Impact Loading
160. Exploration Of Dense Discrete Element For Different Taper Parts Under High Speed Pressing
  <<First  <Prev  Next>  Last>>  Jump to