Font Size:
a
A
A
Keyword [inserts]
Result: 1 - 20 | Page: 1 of 3
1.
Heat Transfer Enhancement By Fiber Fins And Fiber Inserts
2.
Virtual Design And Performance Analysis Of Run-Flat Inserts
3.
Experimental And Numerical Studies Of Enhancing Heat Transfer In A Tube By Inserting Porous Media At The Core
4.
Study On Forced Convection-condensation Heat Transfer And Friction Performance Of Mixture Gas With Vapor Flow In Circular Tube With Edgefold-twisted-tape Inserts
5.
The Characteristics Of Secondary Flow And Heat Transfer Enhancement In Circular Tube With Twisted Tape Or Vortex Generators
6.
Experimental Investigation Of Heat Transfer Character Of Vertical Tube Falling Film Evaporator With Spring Coil Inserted
7.
Investigation Of Heat Transfer Enhancement For Twisted-Tape Inserts In Tubes
8.
Experimental Investigation Of Heat Transfer Capability Of Falling Film Evaporation In The Vertical Tube With Spring Inserts
9.
Experimental Research Of Heat Transfer Enhancement For Meal-wire Inserts In Heat Exchanger
10.
Numerical Study Of Heat Transfer Enhancement In The Tubes
11.
Experimental And Numerical Studies Of Compound Heat Transfer Enhancement Technology By Rough Tubes With Tube Inserts
12.
Research On Heat Transfer Enhancement In Complex Flow Channel Of Heat Exchangers
13.
Investigation Of Experiment And Numerical Simulation For Heat Transfer Enhancement Of Spiral-gear Inserts In A Tube
14.
The Study Of "Jnx" Structure And Its Self Cleaning Performance
15.
Research On Enhancement Of Flat-plate Solar Collector Pipes Heat Convection By Multiple Interlocked Rings Wire Coil Inserts
16.
Research On Flow And Heat Transfer Characteristics In Spiral Baffle Plate Heat Exchanger With Improved Tube
17.
Experimental Study Of The Heat Transfer Enhancement In A Downing-Channel Tube Fitted With Regularly Spaced Twisted Tape And Coiled Wire Inserts
18.
Flow And Heat Transfer Characteristics Of Nanofluid In Twisted-tape Inserts In Tubes
19.
Study On Absorption Properties Of Lithium Bromide Solution In Horizontal Tubes And Mesh Inserts Alternating Structure
20.
Parametric Design Of Trimming Die Inserts Of Automobile Panel
<<First
<Prev
Next>
Last>>
Jump to
