interior ballistics - Globe Thesis

Keyword [interior ballistics] Result: 81 - 98 \| Page: 5 of 5
81.	Research On Key Technologies Of Lightweight 82mm Recoilless Gun
82.	Study Of Squeezing In And Wear Of Large Caliber Rotating Band Under High Chamber Pressure
83.	Calculation And Analysis Of Interior Ballistics Of Automatic Compensator In Launch
84.	Study On The Interior Ballistic And Recoil Reduction Performance Of Ultrahigh Firing Rate Guns With Front Nozzle
85.	Study On Two-phase Flow Of Ignition Jet And Propagation Characteristics Of Ignition Gas In Modular Charge
86.	The Interior Ballistics Simulation Anddispersion Law Research Of Airbore Cluster Munition Gasbag
87.	Research On The Dynamics And System Optimization Of Large-caliber Artillery Belt Squeezing
88.	Mechanism Study Of The Detonation Phenomenon And The Stable Combustion Control Of The Combustion Light Gas Gun
89.	Study On Interior Ballistics And Multiphase Flow Characteristics During The Low Resistance Launching Process Of An Underwater Gun
90.	Study On Ballistic Optimization Design Launching Process For A Small Airborne Guided Ammunition
91.	Refined Modeling Of Interior Ballistics And Its Application In The Study Of Erosion And Wear In Gun Bores
92.	Numerical Study On Interior Ballistics Of Partially Cut Multiperforation Stick Propellant In Large Caliber Gun
93.	Research On Measurement Mechanism Of Projectile Speed In Bore Based On Environmental Magnetic Field
94.	Research On Friction And Wear Properties And Numerical Simulation Of Projectile Band Of Copper Alloy
95.	Modeling And Experimental Study For Interior Ballistics Of Regenerative Liquid Propellant Mortar
96.	Research On The Optimization Of Interior Ballistic Performance Of Howitzer Based On Modern Optimization Algorithm
97.	Research On The Launch Dynamics Of A Light Recoilless Gun
98.	Several Key Technical Researches On Imitating The Swedish Gustav Recoilless Gun
<<First <Prev Next> Last>> Jump to