mixed lubrication - Globe Thesis

Keyword [mixed lubrication] Result: 21 - 40 \| Page: 2 of 4
21.	Study On Non-newtonian Mixed Lubrication Of Point Contact With Surface Roughness
22.	Numerical Simulation Study On Lubrication Performance Of Water Lubricated Ceramic Sliding Bearing
23.	Analysis Of Friction Power Of Spiral Bevel Gear Of The Main Reducer
24.	The Mixed Lubrication Friction Characteristics Analysis Of Rolling Piston Compressor’s Sliding Vane-Chute
25.	Research On Main Sealing Performance Of High Pressure Aircraft Actuator
26.	Analysis Of Influence Of Different Oil Supply Conditions On Mixed Lubrication Performance
27.	Study On The Effect Of Surface Texture Parameter On The Lubrication Performance Of Piston/Cylinder Interface And Optimization Method
28.	Research On The Multi-scale Mixed Lubrication Model For The Cylinder Liner-piston Ring Pack And Prediction Method Of Surface Topography Evolution
29.	Analysis On The Performance Of The Textured Internal Combustion Engine Critical Friction Pairs Under The Mixed Lubrication Regime And Research On The Involved Friction Reducing Mechanism
30.	Research On Friction And Wear Characteristics Of Sliding Cu-based Friction Pairs In Wet Multi-disc Clutches
31.	Investigation Into The Contact Characteristics And Nonlinear Vibration Mechanisms Of Rough Contact Interfaces
32.	Study On The Lubrication Characteristics Of The Micro Texture Of A Vehicle With Bi-directional Rotating Axial Sliding Support
33.	Study On Oil Film Stiffness Performance Of High Speed And Heavy Load Hydrodynamic And Hydrostatic Mixed Lubrication Thrust Bearing
34.	Adhesive Wear Model For Helical Gears Under Dry Friction And Mixed Lubrication
35.	Numerical Calculation And Experimental Study On Textured Surface Tribology Performance Under Mixed Lubrication
36.	Numerical Analysis Of Transient Thermal Mixed Lubrication In Point Contact
37.	Theoretical Modeling And In-situ Optical Observation Of Mixed Lubrication Considering Restricted Solid Particles
38.	Research On Simulation Of Friction And Wear Characteristics Of Linear Contact Under Mixed Lubrication
39.	Mixed Lubrication Analysis And Low Friction Design For Low-speed Heavy-duty Gear-rack Mechanism
40.	Structural Optimization And Mixed Lubrication Analysis Of The Coupled Journal-Thrust Water Lubricated Bearings
<<First <Prev Next> Last>> Jump to