pull-in - Globe Thesis - Globe Thesis

Keyword [pull-in] Result: 1 - 20 \| Page: 1 of 2
1.	Study Of Mechanical Behaviors Of Electrostatically Actuated Microstructures
2.	The Nonlinear Design Of Micro Cantilever
3.	The Study On Adhesion Of Nanobeam Under Van Der Waals Force
4.	Stability Of Micro-nanodevices In The Presence Of Quantum Effect
5.	Analysis Of Non-local Problems From Electrostatic Actuation Of MEMS
6.	Dynamic Characteristics Analysis Of A Micro-machined Switch Consisting Of A Cantilever Beam
7.	Study On The Influence Of Pistons Wind On An Island Station On Thermal Environment During Pull In Process
8.	Quasi-static Pull-in Analysis Of Torsional Electrostatic Microactuator
9.	Research On The Performance Of Force-Balanced Micro-Accelerometer With Errors In The Support Beams
10.	Research On The Starting Performance Of Line-start High-voltage Permanent Magnet Synchronous Motor With Different Rotor Structures
11.	Design, Analysis And Preparation Of Test Device For Fatigue Analysis Of MEMS Based On The Bulk Micromachining
12.	Analysis And Control Of Micro-cantilever With Van Der Waals Forces
13.	Design And Research On MEMS Micro-mirror Arrays
14.	Research On Unbalance Magnetic Pull In Turbo-generator Under Multiple Loading Conditions
15.	Analysis And Study Of Manufacture For MEMS
16.	Research On Coupled Electro-mechanical Theories And Numerical Methods For MEMS/NEMS
17.	Size Effect On The Pull-in Instability Of Electrostatically Actuated Micro-beam
18.	Static And Dynamic Pull-in Instability Characteristics Of Micro/nanoscale Devices
19.	The Research Of Static And Dynamic Performance Of Microcantilever Based On Model Reduction
20.	The Research On Mechanical Behaviors And Optimization Design Of MEMS Resonator Under The Influence Of Thickness Shape Error
<<First <Prev Next> Last>> Jump to