repairing - Globe Thesis

Keyword [repairing] Result: 1 - 20 \| Page: 1 of 10
1.	The Research Of Self-Compensation Additives And Their Repairing And Tribological Effect
2.	Investigation Of Lubricating Additive Of Wear-Self-compensation Repairing And Mechanism
3.	Research On Key Technologies Of Surface Reconstruction From Measured Points
4.	Experimental Research On Material Characteristic And Life Pre-Estamate And Repairing Of Reinforceing Concrete Structure After Fire
5.	Study On The New Technique Of Repairing And Strengthening Masonry Walls With Continuous Carbon Fiber Sheet
6.	Research On Resistance Assessment Method Of Existing Bridges Based On Theory Of Probability
7.	Research On Fatigue Crack Propagation And The Establishment Of Fatigue Inspection Plan Based On Risk Analysis
8.	Researches Of Influence Of Self-Repairing Additive On Performance Of Friction Wear Of Pairs Containing Cast Iron
9.	Preparation Of Novel Abrasion Self-repairing Lubricants And Its Tribological Properties And Applications
10.	A Study On Nonlinear Self-Repairing Control For An Aircraft
11.	Study On The Reliability, The Fatigue Damage Evaluation With Maintenance And Repairing Approach Of Energy-Fed Supply System In Urban Mass Transit
12.	Study On Damage Identification Based On Dynamic Parameters And Self-monitoring And Self-repairing Of Rc Structure Of Near Surface Mounted Sma
13.	Experimental Research Of Steel Fiber Reinforced Concrete On Speed-Repairing The Airport Pavement
14.	The Reconfiguration Of The Self-Repairing Flight Control Law For Fighters Using Neural Networks
15.	Research On High-Fluidity And Super High-Early Strength Concrete
16.	Mechanical Properties And Engineering Application Of Repairing And Strengthening Concrete Members With Carbon Fiber Reinforced Plastic
17.	Study On The Prevention Treatment And Repairing Of Failure Of Cement Concrete Pavement
18.	Research On Cement Concrete Pavement Freezing Destroy Analysis And Iamella Repairing Technic
19.	The Study On The Investigating And Strengthening Of Crack Of The Upper Part Of Welded Steel Crane-girder
20.	Hole Repairing In Triangular Mesh Models And B-Spline Surface Fitting
<<First <Prev Next> Last>> Jump to