Font Size: a A A
Keyword [unbalance]
Result: 1 - 20 | Page: 1 of 10
1. Application Of Time-Varying Dynamic Phasor Theory In Analysis Of Electric Power System
2. Research On Nonlinear Dynamics Of Rotor-Bearing System And On-Line Elinmination Of The Oil Film Whip
3. The Development Of New-type Vertical Dynamic Balancing Machine And The Measurement Of Amount Of Dynamic Unbalance Of Work-piece
4. Simulation Of The Series Compensated Power Grid And Study On UHV Transmission Line Protection
5. Study On Power System Emergency Control Based On Principle Of Power Balance Protection
6. Investigation On Actively Controlled Hydrodynamic Bearing
7. Study Of Control Strategy Of Three-phase Four-wire UPQC Used For Compensating Unbalance And Distortion
8. Research On Static Inverter And Series Hybrid Active Power Filter Based On Dual-BUCK Topology
9. Research On The Control Strategies Of Voltage Source Converter Based HVDC
10. Research On The Key Technologies Of Variable-Speed Constant-Frequency Wind Power Generation
11. Study On Combined Design And Dynamic Characteristics Of Rotor For High-Speed PM Machine
12. Series Connected Energy Storage Sources Equalization Technique Based On Three-cell Direct Equalization Circuit
13. Study On Vibration Coupling Characteristic Of Secondary Failure Due To Rub Contact Under Working Speed Of Big Rotor System
14. Study On Operation And Control Strategy Of DFIG-based Wind Power Generation System With Series Grid-Side Converter
15. Research On Control Technology Of DFIG Under Grid Faults And Grid Voltage Unbalance Conditions
16. Research On Unbalance Vibration Compensation For Active Magnetic Bearings System
17. Research On Measuring & Data Processing Of Balancing Machine For Motorcycle Engine Crank-set
18. A Study On A SVPWM Based ASVG Compensating The Unbalanced System
19. The Research Of The Allowance Maximum Unbalance Rate And Design Parametrers In Individually Residential Heating And Meterage System Of Centralized Heating
20. Condition Monitoring Of Rotating Machinery And Rotor Balancing In-Situ
  <<First  <Prev  Next>  Last>>  Jump to