shot peening - Globe Thesis

Keyword [shot peening] Result: 21 - 40 \| Page: 2 of 3
21.	The Effect Of The Carburized Shot-peening Process On The Metamorphic Layer Generation And The Bending Fatigue Life Of Carburized Gear
22.	Research On The Composite Colloid Coating For Laser Shot Peening On The Damaged Aircraft Parts Based On Online Repairing
23.	Research On The Residual Stress For Laser Shot Peening On The Damaged Aircraft Components Based On Online Repairing
24.	Study On Fatigue Property And Strength Improve Method Of Cu-Ni-Si Alloy Used In Steady Clamp Of High Speed Railway Catenary
25.	Investigation Of Fretting Fatigue Damage And Shot-peening Palliative Mechanisms Of TC4 Alloy Dovetail Joints
26.	Research On Shot Peening Parameters Optimization And Fatigue Properties Of 42CrMo Steel For Automobile Shafts
27.	Study On Lightweight Design And Test For Boom Hoist Reducer In Ship-to-shore Crane
28.	Research On Tooth Profile Parameters And Processing Technology Of Harmonic Reducer With Short Flexspline
29.	Research On Fatigue Life Prediction Of Peening Titanium Alloy Under Spectrum Loading
30.	Residual Stresses Of GFRP/Al-Li Laminates After Shot-peening Forming And During Alternating Thermal Field
31.	Optimal Design And Fatigue Life Analysis Of Taper Leaf Springs
32.	Study On The Fatigue Property And Strength Evaluation Of Al-Si-Mg Aluminum Alloy Used In Positioning Device Of High Speed Railway Overhead Wire
33.	Numerical Analysis And Experimental Study On The Fatigue Of Torsion Beam Rear Suspension Based On Shot Peening
34.	Study Of Self-piercing Riveting Strength Property With Multi-nail Joints
35.	The Simulation And Optimization Study Of Surface Nanocrystallization Technology Of 42 CrMo Steel For Automobile Shafts Via High Energy Shot Peening
36.	An investigation of the propagation behavior of fretting fatigue cracks in titanium alloys
37.	Study Of Numerical Control Peening On Complex Wing Panel Elongation And Material Fatigue Property
38.	Research On Strengthening Mechanisms Of Shot Peening Combined With Ultrasonic Surface Rolling For Novel Gear Steel In High Power Density Gearbox
39.	Research On Shot Peening Strengthening And Tribological Performance Of CF53 Steel For Camshaft Of High-speed And Heavy-duty Diesel Engine
40.	Study On The Fatigue Performance Influencing Factors And Life Prediction Of Micro-shot Peened EA4T Axle Steel
<<First <Prev Next> Last>> Jump to