3-D finite element - Globe Thesis

Keyword [3-D finite element] Result: 1 - 20 \| Page: 1 of 3
1.	Experimental Study On The Full Procedure Of Concrescence Of Bone Fracture With The Help Of The Arm-type Single-side Hydraulic-Adjusted Viscoelastic External Fastened System By Using 3-D Finite Element Model
2.	The Design,Initial Application And Optimization With 3D Finite Element Method Of Sleeve Prosthesis For Revision
3.	3-D Finite Element Models And Parameter Analysis Of Endoskeletal Trans-tibial Monolimb
4.	The 3-D Finite Element Analysis Study Of The Stress Distribution And Displacement Of The Maxillary Transversal Distraction Osteogenesis
5.	Biomechanical Research Of Osteotome Sinus Floor Elevation
6.	Design And Test A Kind Of Unilateral External Fixation With Continuous Display Of Pressure Between Fractured Fragments
7.	Research On The 3-Dimensional Finite Element Modeling Of Human Foot-Skeleton Based On CT Images
8.	The 3-D Finite Element Analysis Of Distalization Of Maxillary First Molar In Three Different Orthodontics Forces
9.	3-D Finite Element Method Analysis Of Low Elastic Modulus β Ti Alloy Implant-bone Interface Stress Distribution
10.	3-D Finite Element Analysis Of Peridental Stress Distribution When Impacted Teeth Are Tracted
11.	Initial Stress In The Periodontal Membrane Of Maxillary First Molar With Different Alveolar Bone Height By Intrusion: A 3-dimensional Finite Element Analysis
12.	A 3D-FEM Study On Stress Distribution And Displacement Of Nasomaxillary Complex Following Application Of Posteriorly Directed Orthopedic Forces
13.	3-D Finite Element Analysis Of Biomechanical Changes Of Lower Cervical Spine In Flexion And Extension
14.	3-D Reconstruction Of Jaw Bone And Dentition Based On Reverse Engineering And Rapid Prototyping
15.	Study On The Initial Stress Distribution Of Maxillary Anterior Dentition And PDL Loaded By The Molar TIP-Back Bend In Different Angles
16.	The Study Of The Biomechanical Stresses Distribution On The Dental Implants In The Posterior Maxilla
17.	An Investigation Of Relationship Between Cantilever Arm Length And Implant Place Of Maxillary Whole Dentition Fixed Bridge And Stress Distribution
18.	The Three Finite Element Analysis Of The Mandibular First Molar Restoration With Two Implants Support One Crown
19.	3-D Finite Element Stress Analysis And Experimental Research Of Micro-implant Anchorage In Orthodontics
20.	3-D Finite Element Analysis Of Biomechanical Changes Of Lower Cervical Spine In Flexion And Extension
<<First <Prev Next> Last>> Jump to