Large eddy simulation of compressible turbulent channel and annular pipe flows with system and wall rotations

The compressible filtered Navier-Stokes equations were solved using a second order accurate finite volume method with low Mach number preconditioning. A dynamic subgrid-scale stress model accounted for the subgrid-scale turbulence. The study focused on the effects of buoyancy and rotation on the structure of turbulence and transport processes including heat transfer. Several different physical arrangements were studied as outlined below.; The effects of buoyancy were first studied in a vertical channel using large eddy simulation (LES). The walls were maintained at constant temperatures, one heated and the other cooled. Results showed that aiding and opposing buoyancy forces emerge near the heated and cooled walls, respectively. In the aiding flow, the turbulent intensities and heat transfer were suppressed at large values of Grashof number. In the opposing flow, however, turbulence was enhanced with increased velocity fluctuations.; Another buoyancy study considered turbulent flow in a vertically oriented annulus. Isoflux wall boundary conditions with low and high heating were imposed on the inner wall while the outer wall was adiabatic. The results showed that the strong heating and buoyancy force caused distortions of the flow structure resulting in reduction of turbulent intensities, shear stress, and turbulent heat flux, particularly near the heated wall.; Flow in an annular pipe with and without an outer wall rotation about its axis was first investigated at moderate Reynolds numbers. When the outer pipe wall was rotated, a significant reduction of turbulent kinetic energy was realized near the rotating wall.; Secondly, a large eddy simulation has been performed to investigate the effect of swirl on the heat and momentum transfer in an annular pipe flow with a rotating inner wall. The simulations indicated that the Nusselt number and the wall friction coefficient increased with increasing rotation speed of the wall. It was also observed that the axial velocity profile became flattened and turbulent intensities were enhanced due to swirl.; As a part of the study of rotation effects, large eddy simulation of a rotating ribbed channel flow with heat transfer was investigated. The rotation axis was parallel to the spanwise direction of the parallel plate channel. Uniform heat flux was applied to the channel for two rates of rotation. The results showed that near the stable (leading) side, the turbulent intensities and heat transfer were suppressed, but turbulence was enhanced with increasing shear stress and turbulent kinetic energy near the unstable (trailing) side.