Theoretical and experimental studies for cellular structure design of extrudates produced with the supercritical fluid extrusion process

Posted on:1996-05-17

Degree:Ph.D

Type:Dissertation

University:Cornell University

Candidate:Singh, Bhajmohan

Full Text:PDF

GTID:1461390014988228

Subject:Agriculture

Abstract/Summary:

The relationship between extrusion conditions, CO;Finally, theoretical modeling of cell size and product density of extrudates for CO;Secondly, residence time distribution (RTD) was studied in the mixing zone of an extruder for three screw speeds (150, 200 and 250 rpm) and three CO...

Keywords/Search Tags:

Theoretical, Extrudates, Extrusion

Related items

1	Effect of extrusion on physico-chemical properties of quinoa-cassava extrudates fortified with cranberry concentrate
2	Understanding the impact of non-thermal processing and CO 2 assisted extrusion on antioxidant, textural and functional properties of corn, sorghum and apple pomace based extrudates
3	Investigations on the role of distillers dried grains with solubles for producing aquaculture feed using extrusion technology
4	Influence of novel techniques on solubility, mechanical properties and permeability via hot melt extrusion technology
5	Extrusion Of Hierarchically Porous ZSM-5 Zeolite And Mechanical Properties Of Extrudates
6	The Study Of Indomethacin Sustained Release Extrudates Prepared By Hot Melt Extrusion
7	Paste extrusion of polytetrafluoroethylene (PTFE) fine powder resin: The effects of processing aid physical properties
8	The Theoretical Study On Forming Process In Rubber Tire Co-Extrusion And Optimal Design Of Die
9	Optimization of low-density foam extrudates via single-screw extrusion using physical and chemical blowing agents
10	Theoretical Analysis And Numerical Simulation Of Hot Extrusion Of P91 Steel Based On Hollow Slab