| Heat transfer is an important phenomenon in both wellbore and reservoir. The pertinent temperature distribution can provide a valuable perspective in analyzing and optimizing the oil production. In this work, two kinds of co-production, production fluid through the annulus and tubing, and through two independent tubings, have been modeled using steady state analysis. The fluid temperatures in the production string and annulus have been solved analytically in both cases. Furthermore, we extended the theory of steady state energy transport to remedy asphaltene deposition problem by circulating the cooling fluid in the annulus.; Due to the complex nature of two-phase flow in the oil/gas production, more reliable mechanistic modeling approaches have been developed since early 1980's. Rooted in Hasan-Kabir model, we have developed a wellbore/reservoir coupling simulator for the transient non-Darcy two-phase flow in the flow-after-flow well test. The entire historical flow behavior has been modeled using superposition method and validated with field data. Our second simulation is for the investigation of a blowout well, which is a great concern in the oil field. When the pressure in the wellbore is sufficiently high, the fluids will attain sonic velocity at the wellhead. We presented a computational algorithm to estimate the blowout rate in a given wellbore/reservoir system and examined four major parameters, such as formation permeability, Gas-Oil-Ratio (GOR), reservoir pressure and tubing diameter. The transient nature of this approach also illustrates the evolution process of a blowout.; We have also developed a transient simulator to determine the location and severity of a blockage in a gas pipeline based on the theory of two-phase flow and pressure transient analysis. The presence of a sizeable blockage will affect the outlet gas pressure response by decreasing the available pipe volume and increasing the friction loss of the fluid flow. The simulator solves for the pressure response using a finite and iterative numerical method with transport theory of mass and momentum. Comparing the outlet transient pressure signature from a clean pipeline with those having a plug shows that the predictions of our model agree well with the experimental data. |
