| Montmorillonite is a kind of silicate with the formation of layers. Each unit cell is made up of two (Si-O4) tetrahedral layers and a (Si-O6) tetrahedral layer . Al(III) from (Si-O6) tetrahedral layer can be replaced by Mg( II ), Fe( II) , Zn( II) , Li( I) cations, Si(IV) from (Si-O4) tetrahedral layers can be replaced by Al(III) and Fe(HI).because of loss of positive charge, montmorillonite has a stronger ability of adsorption and cation-exchange.From the view of that, inorganic substance is used to pillar the montmorillonite .Pillared Interlayered Montmorillonite is a new type of material ,in which layers are propped up with pillared interlayered agent .It is characterized by big aperture and great specific surface area.This paper produces inorganic Pillared Interlayered Montmorillonite by the way of using hydroxyl-Al (keggin cation ) as pillared interlayered agent ;And studies adsorptive properties of the purified montmorillonite and inorganic pillared and inorganic pillared interlayered montmorillonite on Cu( II) on the conditions of different quantity , adsorptive time and pH and finds out the proper condition . The results indicate on the same condition the adsorptive effictiveness of inorganic pillared interlayered montmorillonite on Cu( II ) is better than that of purified montmorillonite ,and they are in comfirmity with the Freundlich adsorption isotherms and the Langmuir adsorption isotherms at the same time; Using Cationic Pink FG imitate the dyestuff wasterwater ,the suitable conditions and adsorption isotherms of adsorbing dyestuff wasterwater by inorganic pillared interlayered montmorillonite are studied . The results show that the interlayer spacing of pillared montmorillonite increases , and the adsorbing and decolorizing capacities strengthen . The suitable conditions of the quantity of montmorillonite ,treatment time and the pH are studied . The decoloration could be stated by an expression also similar to Freundlich and Langmuir model. |
PDF Full Text Request