Unit Crystal Copper Pole Production Craft And Equipment Research And Development

Recent years, along with the rapid development of electronic, communication, and AV technology, to transit all kinds of information with high fidelity and high-definition meets the growing needs of modern science and technology on communications technology. As the progress of the electron technology sophisticated and miniaturized, the semiconductor engineering, integrated circuit technique, and quality of electronic components have been elevated and provided a beakthrough.And the qualities of the leading wire and electrical cable, which are used for transiting information, have been the prominent problem that affects the fidelity and definition of the complete appliance.However, the single crystal copper unit is a new kind of copper material which is produced by the combination of advanced directional solidification technology with high effective continuous casting technology. Comparing with the polycrystalline copper that applies presently, its relative amount of elongation has been increased about 80%,resistivity has been decreased about 16% and transverse grain boundary has been eliminated, so that the conductibility of conductor and the fidelity of signal transmission have been greatly enhanced. To further manufacture with single crystal copper to develop and manufacture such as leading wire with high fidelity,IPelectrical cable with high transmission frequency, and minute leading wire of microelement, because not only can it be satisfied by the high technology requisition about sophisticated,miniaturized,high interference rejection, high transmission frequency and high fidelity in regions, such as electronic national defense, aerospace and aviation, and computer network, but also can it be widely used in regions, such as civil electronic technological, AV equipments, and HDTV.This paper is going to elaborate the craft parameter and control of the single crystal copper pole produce, moreover ,to research and develop the essential equipment of single crystal copper pole produce, thermostat oven(Melting Furnace of Single Crystal Cope) and the tractor, basing on this theoretical basis. In the meantime, to detailed analyze and structural designs on its function, and to do particular structural design and proofing calculation on essential spare parts of equipments with computer software, such as AutoCAD, and Pro/E, and to analyze the temperature field of stretch casting with ANSYS simultaneously, then to design equipments which are with rational structure finally.