Eirich Intensive Mixer Parts Home-made

Eirich Intensive Mixer is famous as high efficiency and high hemogenous, Eirich mixing system comprises just 3 components:The rotating mixing pan; Two mixing tools arranged eccentrically which are capable of creating a counterflow or a cross-flow;The stationary scraper tool, which prevents material build-up at the walls and the floor of the pan and accelerates the emptying process at the end of the mixing time.In this paper, domestic blades and liners of mixer is introduced in detail. In 2002, EIRICH mixer was imported and brought into use in 2004. Because the parts price is higher and its supply cycle is longer, we must make them domestic for the element of mixer.EIRICH mixer wall equipped with wear-resistant cylinder liner. During mixing, the different nature of the materials of different particle size of about 160℃in the mixing temperature conditions direct touch with the liner, the liner wear mainly from mixing in expanding materials erosion, the main form of failure to abrasive wear, the liner is mixer main consumption bulky, it's homemade of great significance, the paper detailed analysis of the wear-resistant materials used in domestic properties, and are now grouped together on the development in recent years of wear-resistant meta-bainite steel Principle and wear-resistant properties of the Organization, in mixer made homemade liner try.Domestic blade is the mixer spare parts localization of the focus, first, because they are core components of mixer, the quality of mixing make a direct relationship to blades; Second, because blade is the largest consumption of wear and blade making difficult, complicated process required from the category information on the production of spare parts might experience; Third, from the cost and time considerations, not always rely on imported items must be realized as early as possible disturb the domestic blades.For Imports blades, the wear-resistant layer in the substrate surface was brazed hard alloy, as we know, its good at wearable. Combining the domestic manufacturing technology level, we decide two way to made the blades. one is same process as import parts.The other is Surfacing Welding with Tungsten Carbide (DURMAT-A welding rods). the two spare parts processing out on the line after testing, the use of observation results. The second way show good resistance to wear and economical after using improving blades.