The Study Of X-ray Detector Based Wire Chamber

In this paper, an X ray detector based on multi-wire proportion chamber is presented, and results obtained from the latest electronics. The performance of MWPC was texted. the noise problem was solved in the texting process, and some parameters of the readout electronics, such as the electronics threshold, baseline, Trigger Latency and so on, had a reasonable choice and correct settings. The detector was texted in different conditions in order to get better understanding of the performance of the detector. The problems encountered in the experiment were analyzed. its spatial resolution (FWHM) along the anodewire direction was about 300μm in X-ray test.Through the text of the detector, get more detail information of the synchrotron radiation light. And different experiment station of the SR need different kinds of detector through the experiment "text different samples. The deficiency of the readout structural appeared through those texts, so a one-dimensional detector and faster readout electronics were developed.