Simulation And Virtual Reality Of Marine Separator

Separator are used widely in all aspects of the modern engineering field. Especially in the ship, the Separator is special equipment that is indispensable to Fuel Oil systems and Lubricating Oil System. Therefore, we should understand the operating principle of separator, be familiar with its key components and the corresponding fault maintenance.All of these play important roles in the voyage safety. This paper associate Computer Simulation and Virtual Reality theory, which clearly expresses the separator operating principle and components information by the three-dimensional shows.Besides, the program can also directly invoke simulation data to achieve the control of three-dimensional model in the bottom.This paper firstly introduce the achievement of separator simulation, by which it simulates the operating principle of separator .At the same time,the simulation system also sets up several common malfunction. Secondly, by analyzing malfunction causes, we can dismantle the separator with destination. It is the focus of this paper to study and search the Virtual Reality of separator with two methods.It is also an important point to analysis the two methods of achieving this principle, and their respective advantages and disadvantages.And then this arcle gives the correlative case.(1) Virtual Reality based on DirectX3D.This is achieved by underlying programming.Based on the Microsoft Visual Studio. NET 2005 and DirectX graphics library,the paper achieves the virtual dismantling of separator. At the same time, making full use of APIs provided by DirectX, accessing the hardware equipment, this paper realize the control of 3D model by transformation matrix, light, material and other means.(2) Virtual Reality based on the EON.This is achieved by advanced platform.EON developers taking full advantage of the convenience of using the system-provided function nodes and user-defined development of function nodes, achieve the separator model dismantling. For the main components of the separator and key actions, there are some charater and flash demonstrations to express the operating principle of separator. Using the full set of laboratory hardware equipment, achieve the Virtual Reality. In addition, based on the actual dismantling of the separator, this paper adopts Solidworks to establish the exact proportion model.Then optimizes the model and sets the some important assembly relations through 3DS Max software.Establishment and optimization of the model is the Virtual Reality foundation.It is the most important content of this article to achieve the Virtual Reality based on two methods of EON and DirectX3D.And the paper is accomplished via both low-level and high-level programming design.