Design And Implementation Of HF Test-Evaluation And Communication Software

On the basis of "Test-Evaluation and Communication System Development" project, the main task of this thesis is to design and achieve HF Test-Evaluation and Communication software.With the software, each communication performance of existing communication controller can be tested and evaluated. By controlling communication controller, communication function of system is achieved.This software consists of test data source generator module, test module, evaluation module and communication module. And test data source generator module generates experimentation material. Test module and communication module are responsible for corresponding test function and communication function. The responsibility of evaluation module is to manage the test results and compute evaluation marks of the communication controller. On top of the four function modules is user operating interface, which is used to input control information, display communication process and data for test-evaluation. And under them is communication protocol module and interface module. These two modules are responsible for making control information, controlling the transmission flow of data units and managing the interface between computer and communication controller. The software is developed with Visual C++ and operates in Windows XP operating system.The entire test-evaluation communication system is obtained by linking RS-232 serial port of computer with communication controller.At present, HF Test-Evaluation and Communication software is accomplished. And indoor system debug with communication controller is passed.