Quartz Arystal Wafer Automatic Machine Research And Development

From a long time,sorting quartz crystal wafer is mainly manual worked in our country, which has a large amount of defects. As the demand of the market is growing, the automatic sorting machine of quartz crystal wafer is used step by step, especially the full automatic machine. the automatic measuring system of quartz crystal wafer is the combination of the advanced technique of modern micro-electronics and computer application. And it renders the system of machine several advantages such as high stabilization, sorting speed and good reiteration etc.The using of the automatic equipment is not efficient obviously as the full automatic machines are mainly depended on import which is expensive and high maintaining cost. While the domestic sorting machine of quartz crystal wafer is less precision and higher repair ratio.With the requirement of JiYuan Irish diamond factory, the automatic sorting machine of quartz crystal wafer is studied on by using the international advanced technique of full automatic sorting machine of quartz crystal wafer, which is based on the semi-automatic sorting machine of quartz crystal wafer.The automatic sorting machine of quartz crystal wafer which is based on semi-automatic x-ray angle sortor, makes the automatic operation of measuring poor singnal and data processing possible by using controller of data collection,controlling system of PLC and the computer measuring and controlling . Therefore it reduces the error during the course of measuring and renders high precision of measuring and efficient.In this paper, data collection, PLC controlling system and the pneumatically operation system of the automatic sorting system, is designed and developed, and the angle sorting method to measure the quartz is developed. Otherwise, the communion between machines and operator and the intercommunion of every system are obtained.Finally, the precision of the machine system is analyzed by the method of theory combined practice.