Ammunition Dimension Measure Of Ammunition Preparation Operating System

This paper is mainly about the design for ammunition dimension automatic measure of ammunition preparation operating system. According to the requirements of the system, the ammunition preparation operating system is composed of seven positions: cleaning ammunition , airing ammunition , moisture proofing , weighing , ammunition dimension automatic measure , point spraying an marking , storing . Among of them , the ammunition dimension automatic measure is most important research object , ammunition measure technology is key of ammunition production quality, with the fast development of products and science, there are more and more requires for precision and efficiency of ammunition measure.Based on laser displacement probing technique, fine mechanics technology, computer real-time control and data processing technology, a non-contact measure system for ammunition dimensions are presented. And then, it betrayed the components, of system, measure principle, data processing , and analysis of the cause of error and the ways of improving precision .By laser displacement sensor, we can measure the radial chamfer dimension and proper alignment of ammunition. It elaborated operating principle and implementations of signal acquisition transmission unit, and analysis the error of measure data. This measure system decreased labor intensity of ammunition acceptance staff, increase the efficiency of ammunition acceptance, It provided a high accuracy, high efficiency, high degree of automation platform for acceptance work of ammunition preparation operating system.