A Production Plant Is Multilayer Linkage Supervision Of Safety Supervision And Inspection Model Research

Oil companies has a flammable and explosive, poisonous and harmful, hightemperature and high pressure, continuous operation, some characteristics ofpolyline long side wide, have bigger risk in the process of production, work safetyalways is the top priority of petroleum enterprise, so through the supervision andinspection system, straightening out all aspects of safety management andsupervision of behavior, make each unit, each post safety management work becomemore active, to further improve responsibility consciousness, ultimately achievelayer upon layer of security management effect. In this paper the main researchcontent is as follows:1) production safety supervision and inspection of mode analysis of currentresearchMainly from various fields at home and abroad analysis of regulatory effect onsafety supervision and management methods, to find out from each link of loopholesin management rules, and sorted out one by one to find out the common problems.2) mode of "four modernizations" optimizing production safety supervision andinspection"Supervision staff specialization, supervise mechanism, supervision, stylizedinto the open, supervision information quickly turn" referred to as the "fourmodernizations", mainly from the construction, standardize the supervisionmechanism, public supervision and conditions, the rectification problem concernsfour aspects, highlight the professional requirements of knowledge technology,highlight the supervision and inspection method to the variety of the integrated useof, formation of continuity and long-term safety supervision and inspection, basedon the problem of exposure, rewards and punishments for safety violations unit andindividual, to prevent potential safety hazard in time, to correct the violations.3) multilayer linkage supervision mode to establish safety supervision andinspection Mainly aimed at the secondary level, level3and level4level of differentfunctions and tasks, layered, three-dimensional of the safety supervision andmanagement responsibilities and requirements for the decomposition of linkageeffect between layers formed, for the discovery of problems hidden trouble andrectification formed a closed loop.After optimization of the safety supervision mode and multilayer linkageregulation model of establishing safety supervision and inspection, thecomprehensive implementation of work safety supervision and inspection, animatingthe whole unit at all levels, from top to bottom of safety regulation, from the bottomof corrective feedback problems, form a good atmosphere of safety supervisionmechanism of multilayer linkage.