| Aluminum foil slitting machine hydraulic system is an essential part of aluminumfoil Slitting unit during normal operation of the part, based on the grasp of the domesticslitting mill hydraulic system, according to the requirements of the actual design a set ofhydraulic system design. The aluminum foil slitting line for the overall analysis, thelongitudinal shearing unit consists of several parts, a detailed analysis of the uncoilingmachine, cutting machine, coiling machine working process, the hydraulic system of theunit are analyzed, and emphatically analyzes the influence of hydraulic oil and constantpressure variable pump system the temperature rise, and gives the methods to solvethese problems. To realize the function of hydraulic system were analyzed, thealuminum foil Slitting unit to complete the action is more, so according to realizedifferent functions that aluminum foil slitting machine is divided into several hydraulicsystem design, according to the requirements of aluminum foil slitting machine made ofaluminum foil slitting machine hydraulic system principle diagram.According to the principle diagram of hydraulic system for the selection ofcomponents, mainly according to the required flow pressure and other parameters bycalculating the theoretical data are obtained, according to the actual needs ofstandardized selection; the hydraulic system performance checking, the hydraulicsystem meets the design requirements; the hydraulic valve installation options at present,analyses several main installation, installation mode superposition valve that is mostsuitable for this system. Introduced the hydraulic system simulation analysis of severalsoftware, select the AMESim simulation of the system, described in detail the AMESimhydraulic simulation steps, at the end of the hydraulic system was simulated using theAMESim software, mainly from the displacement and velocity curves, the actualrunning situation simulation. |
PDF Full Text Request