The Design And Implementation Of Telecom Business Terminal Management System Based On WMI

With the rapid development of the telecommunications industry, as an important carrierof carrying business-business hall also got rapid development. Due to the business hallbusiness carrying needs a lot of equipment (the equipment includes not only the hardware,also includes the run on these devices support software) for support. The rapid increase in thenumber of business hall, puts forward the increasing of the geographical scope of these carrybusiness management of the software and hardware devices are more prominent, the bearingbusiness of software and hardware equipment running condition monitoring, fault reportingand handling have become increasingly frequent, if the equipment problems didn’t get timelytreatment, will be greatly affected the normal operation of business hall.The management of the business hall equipment problems, the industry has seen avariety of solutions. But, from the traditional manual parameter management, to useinformation technology to support the fixed asset management software, server managementsolutions to professional, can well solve the problem of equipment management in telecombusiness hall, wide distribution, type of equipment complex, less maintenance personnel. Theplan of equipment maintenance information or need a lot of repetitive manual work, or lack ofnecessary operation monitoring means, or the need for expensive maintenance costs (such as IBM Tivoli series solution, although the equipment the equipment information can beautomatically collected and active monitoring of running status of equipment, due to thecomplex product is expensive, deployment, and need special personnel to participate in themanagement of network management. Although can effectively solve the problem of themanagement of the enterprise server, but it does not apply to telecommunications businesshall of such a large scale, scattered distribution, equipment of mixed special cases).According to the above problem, this article first to the provincial, municipaltelecommunications business hall carried on the thorough analysis of existing problems, andinduces the provincial characteristics of typical business hall, i.e., the number of large,scattered distribution, equipment complex, less, at the same time, on the demand of theequipment management, requirement of intelligent (and automatically collect relevantequipment information for effective monitoring), simple (no need for additional equipmentmaintenance workload), security (equipment management to existing production environmentimpact).The demand for these, this paper puts forward a new plan of the design andimplementation of equipment management. The system adopts B/S structure, using WMI(Windows Management Instrumentation) technology to realize the automatic acquisition ofterminal hardware equipment information and running status monitoring; Through using thetelecoms industry’s ethos of SID (Share Information Data) Shared Information model forsystem modeling, solve the business hall device number, type of complex system modelingproblem; Through the terminal equipment information collection module into the businesssupport software, minimize the equipment management system of the artificial maintenanceworkload. Compared with other similar systems, design work of this paper mainly has thefollowing features:1. Solve the terminal hardware and software running status information collection andmonitoring. Automatically by the WMI technology acquisition, solved the original need alarge artificial maintenance of equipment information collection work. At the same time, toensure that the terminal information,real-time, accurate and effective.2. Automatic binding equipment and business hall. Through the network IP informationcollection equipment, and to compare the business hall network designation ID, system canautomatically to postal service hall of equipment and business hall, automatically belong tobinding. To be sure, due to reasons such as configuration errors, equipment relocation, or islikely to cause equipment and business hall can’t bind correctly, in view of the terminalequipment can’t normal bind, the system provides the function of manual binding.3. The terminal equipment abnormal monitoring and alarm. Through to the terminalinformation acquisition and processing, the system can timely find the change of the terminal change run abnormal, the system can timely capture these exceptions and exception alarm andprocessing.4. Equipment failure complaint and handling process. Complaint system provides theequipment and process. When users find system malfunctioned, notify the maintenancepersonnel can through complaint processing and manufacturers of equipment timelymaintenance and accepted. System to record the whole failure process, and provides thesystem running parameters of equipment failure.5. Based on the modeling of SID. With the SID modeling, the system has high flexibilityand extensibility. System can be more flexible to adapt to the complex business operation ofthe scene.