Design Of Stamping Die And Stamping Automatic Feeding Of Bottle Opener

Because the mould efficiency directly affects the efficiency of a production line,even the efficiency of the whole workshop,so more than a mold cavity became a strong manufacturing requirement.And domestic existing equipment is most used semi-automatic or purely human,artificial links,slow and time-consuming work,is not conducive to the automation of industrial production.As a result,the market for can realize full automatic mould and mould expansion point puts forward the urgent request,and must become a trend.This topic in combination with the characteristics of mold itself,and under the premise of the existing processing equipment,in order to improve efficiency and labor intensity for the purpose,design a set of bottle opener stamping mold,the mold has more than a mold cavity and is equipped with automatic feeding system.The automatic feeding system is stepping motor through the gear reducer to synchronous belt wheel,synchronous belt wheel drive the feed plate to realize feeding,the conveying mechanism has the function of feeding smoothly and adjustable speed.Bottle opener more than a mold cavity mold not only has the automatic discharge,and has the function of fault diagnosis and counting,greatly reduces the labor intensity of workers,can achieve twice the result with half the effort.This topic main content is as follows:(1)Mold the current application and development.By understanding the premise of a large number of literature,the situation of the development of mold at home and abroad is introduced,on the key technology of the mould to further explained through practical application.(2)The bottle opener die more than a mold cavity and the overall design plan of automatic feed institutions.First of all,from the production conditions,technical requirements,the existing processing equipment and other factors to consider,split bottle opener die more than a mold cavity and the automatic feeding mechanism project overall design.(3)Drawing mould three-dimensional graph,split a bottle opener mould and automatic feeding mechanism of the mold cavity more institutions 3 d drawing and assembly,to make corresponding changes to your unreasonable place,and the simulation to make bottle opener.With Solidworks software for 3 d modeling,mold working parts of key and motion simulation of convex and concave,to verify that the structure can meet the use requirements.