Energy Consumption Simulation And Operation Optimization Of The Chunliang Station

As oilfield entering high water cut development stage,the operation of the joint station energy consumption increasing,efficiency decrease.And equipment joint station is a monomer composition of the organic whole,between each monomer equipment connect with each other,restrict each other,a single equipment optimal does not guarantee that the operation of the system running in the optimal state.So the analysis and understanding of joint station can use,in whole or in part in joint stands in the Angle of system operation parameters optimization analysis is very necessary.This article first pure beam as the research object,in union station process certain conditions,compiled the first pure beams operation optimization software.The main equipment of joint station energy balance model is established,and the energy equilibrium analysis,the main equipment based on the analysis of the energy station overall energy balance analysis model is established,on the whole station can use analysis.Then on the basis of the joint station operation parameters simulation,calculates the operation cost,and to run the cost minimum as objective function,analysis and determine influence the parameters of the joint station operation cost,the constraint conditions of running parameters,establish mathematical model,genetic algorithm selection heuristic algorithm was used to solve the optimization model.Optimized joint station operation cost by optimization of 22.732 million dropped to 20.503 million per year,a year before the unit consumption by the optimization before 16.35 dropped to 15.32 kgce kgce/t/t,suggests that energy consumption analysis of joint station,choose reasonable parameters for operation optimization of the joint station,improve the operation efficiency is feasible.With c + + builder finally compiled the first pure beam energy auxiliary softwareanalysis and operation optimization of the subject.