Research On The Technology Of DK7632 In Typical Machining Parts Of The Stamping Die

Cold stamping die parts are a number of important stamping methods of processing parts,common such as die inserts and so on.,In the processing of such parts,the most important problem is how to deal with the deformation of the cutting parts and support section of the repair knife.At present,there are many studies on this issue,and a lot of processing methods have been developed.For the deformation of the parts,mainly based on the location of the hole through the hole,the method of clamping to determine the treatment,and for the maintenance of the repair section of the parts of the precision and processing will have a greater impact,so this has not yet Make a clear conclusion.For the processing of concave stencils,how to improve the machining accuracy of the template is the main consideration.In order to meet this requirement,some advanced processing methods such as wire cutting can be used in the processing of parts such as taper up and down.This can significantly improve the processing efficiency and also provide the positioning accuracy.Good applicability.Low-speed wire cutting is such a processing technology,which can better meet the high-precision parts of the processing requirements,for some complex special-shaped template parts also have a high applicability.At present,this kind of processing technology plays an important role in mold and machinery manufacturing,and it has certain positive effect on improving the precision of abrasive processing and promoting the development of machine tool industry.In the use of low-speed wire cutting machine for part processing,the need for computer programming,and through the program design to complete the choice of cutting points,cutting parameters set the relevant tasks,so as to ensure the smooth realization of the machine related processing purposes.The rotor rotor stator mold structure and shape is more complex,and its processing is also very difficult,and low-speed wire cutting can be better to meet its processing requirements,the concave plate,shaped punch,and other parts can be precisely processed,This article mainly uses this technology to carry on the processing to the motor rotor stator abrasive.