Evacuation Lightening For Buildings Using Piezoelectric Sensors Sheets

Nowadays regarding this modern world,power,energy and safety are the basic requirements.To deal with the growing desire of energy the ultimate solution is to just implement the renewable sources of energy and then to use these renewable sources of energy for the safety of human beings.These renewable sources of energy need to be implemented in the manner they are,by focusing the research work done it need to be implemented like that.These methods should be applied,in demand to acquire the anticipated output.In case of this research the method used is footsteps power generation from piezoelectric sensors sheets as the source of renewable energy and then uses that energy for the evacuation lightening of the buildings.In this way,we can get electrical energy when walking on certain arrangements like floor,footpaths,roads,stairs and we can also implement such kind of systems someplace else mainly in the dense populated region.In this research "Evacuation lightening for buildings using piezoelectric sensors sheets" the fundamental functioning is based on the piezoelectric sensors and smoke detector.In this design,the wood sheets and moveable net bolts are fixed below and on the top of the sensors in order to enforce electrical energy from footsteps using piezoelectric sensors system,in addition silicone gel was pasted on the top of all sensors which is located on the lower wood plate and movement into the cavity then spontaneously pressure is applied when someone take step on the plates.At the top and bottom of wood sheets a hole is fixed such that a moveable net bolts could be adjusted among the bottom and the top plate.I made my own self accomplished to design such suitable system,we can possibly run LED's or lights in the path of evacuation of the buildings and we can also possibly run our household tools through A/C output as the outcome of completing the above procedure or technique.Once from D/C output to charge the battery and converting it into A/C for normal usage.But the key objective in this research is to run LED's or lights from that generation directly using DC power.It is shown that these kinds of designs and approaches of electrical power generation for the safety purposes have practical values,and encounter the requirement and amount of energy globally as well.