| In the past decade, electrostatic layer-by-layer (LBL) assembly has gained attention because it is a facile and robust method to prepare thin polymer films. Due to the industrial importance and natural abundance of cellulose, its incorporation into LBL films is of particular interest. This thesis examines the use of nanocrystalline cellulose, prepared by sulfuric acid hydrolysis of cotton, in polyelectrolyte multilayer films. Conventional solution-dipping and a spin-coating variant of LBL assembly both resulted in chemically defined, reproducible, and smooth films with adjustable properties. Surface morphology was studied by atomic force microscopy (AFM) and scanning electron microscopy (SEM), and film growth was monitored by X-ray photoelectron spectroscopy (XPS) and optical techniques. Orientation of the rod-like cellulose nanocrystals imparted anisotropic film properties, and birefringence was calculated from angle dependent and wavelength dependent optical reflectometry measurements. While spin-coating resulted in radial orientation of the nanocrystals, electrostatic adsorption in a magnetic field led to linear alignment. The internal structure, surface orientation and wettability of these materials were investigated. The attractive and repulsive forces acting close to the surface of the multilayer films in aqueous media were measured by colloid-probe AFM and the interaction forces between the film surfaces and charged colloidal-probes were compared to the predictions of the DLVO theory. The applications and advantages of polyelectrolyte multilayers containing nanocrystalline cellulose and their potential as model cellulose surfaces are discussed. |
