| As electried vehicles penetrate the market, consumers have been gradually experiencing the benets of their high performance and contribution towards green living. However, the benets of the new powertrain system bring with them many severe safety hazards, which hinder their development. The early detection of electric faults is an essential approach to identifying the occurrence of hazards and ensuring safe operation. This thesis studies state-of-the-art fault diagnosis methods for the battery system in electried vehicles. Based on the uniqueness of the battery system, the self-redundant fault detection methods are proposed and studied in detail.;First, abundant experiments are conducted to capture the electrical and thermal behaviors of the lithium ion battery cells, serving as the basic energy storage elements in the commercial battery packs nowadays, and the simple thresholdbased fault detection method is implemented to identify electric faults, including over charge, over discharge, external short circuit and internal short circuit.;Then, the model-based fault detection method is investigated to compensate the drawback of the threshold-based diagnosis method, in which the input information is ignored. The continuous-time system identication methods are introduced to estimate model parameters of the equivalent circuit model. The estimated model provides more accurate and robust fault detection performance compared with that of the traditional discrete-time system identication methods.;Next, the correlation-based fault diagnosis method is proposed for short circuit detections in the battery system. This method does not require the preliminary eort in battery modeling, identication and validation. More importantly, the correlation coecient is not sensitive to variations in open circuit voltages and internal resistances, and thus is robust to cell inconsistencies in real applications.;After that, the theory of the interleaved voltage measurement method is developed to distinguish between sensor and cell failure without extra hardware components or battery models. The theory is then improved such that the constraint in sensor topology is removed by varying the sensor matrix. The feasibility of the measurement method is validated by simulation and experiment.;At last, the interleaved voltage measurement method is integrated with the correlation-based fault diagnosis method to achieve both the advantages. The viability of the integration is conrmed by experiment validation.;In summary, this thesis develops the self-redundant fault diagnosis approaches, including the correlation-based short circuit detection method and the interleaved voltage measurement method. These methods are specically designed for the battery system, in which duplicative components and similar measurements are needed. The advantages of the proposed self-redundant fault diagnosis methods over the state-ofthe- art redundancy-based methods are listed as follows,;i) The implementation of hardware redundancy is not necessary.;ii) No cell testing, modeling and validation work are required.;iii) The method is robust to cell inconsistencies in battery states. iv) The ambiguity in cell and sensor failure is resolved upon fault occurrence.;The disadvantages of the proposed fault detection methods are.;i) More computation power is needed to implement online.;ii) The noise level of the voltage measurements is increased. |
