Oversampling A/D Converters with Improved Signal Transfer Functions | | Posted on:2011-11-15 | Degree:Ph.D | Type:Thesis | | University:University of Toronto (Canada) | Candidate:Pandita, Bupesh | Full Text:PDF | | GTID:2448390002960421 | Subject:Engineering | | Abstract/Summary: | PDF Full Text Request | | This thesis proposes a low-IF receiver architecture suitable for the realization of single-chip receivers. To alleviate the image-rejection requirements of the front-end filters an oversampling complex discrete-time DeltaSigma ADC with a signal-transfer function that achieves a significant filtering of interfering signals is proposed. A filtering ADC reduces the complexity of the receiver by minimizing the requirements of analog filters in the IF digitization path. Discrete-time DeltaSigma ADCs have precise resonant frequency and clock frequency ratios and, hence, do not require the calibration or tuning that is necessary in the case of continuous-time DeltaSigma modulator implementations. This feature makes the proposed discrete-time DeltaSigma ADC ideal for multistandard receiver applications.;The reported complex DeltaSigma ADC is intended for DTV receiver applications. With a maximum intended sampling frequency of 128 MHz and an OSR of 16, the ADC has been designed to support a maximum DTV signal bandwidth of 8 MHz. Except for a somewhat reduced maximum sampling frequency, the test results of the prototype complex DeltaSigma modulator are very close to the simulated results. The IC achieved 70.9 dB SNDR over a 6 MHz band centered around 3 MHz. The image rejection ratio (IRR) of the DeltaSigma ADC was measured to be greater than 65d B. The measurement results confirm the filtering characteristics of the ADC. The fabricated chip consumes 177 mW and occupies a silicon area of 2.15 mm2.;The DeltaSigma modulator signal-transfer function (STF) and noise-transfer function (NTF) have been designed using complex filter routines based on classical filter design procedures. With a filtering STF and stop band attenuation greater than 30dB, the DeltaSigma modulator reduces intermodulation of the desired signal and the interfering signals at the input of the quantizer, and also avoids feedback of the high-frequency interfering signals at the input of the modulator. | | Keywords/Search Tags: | Deltasigma ADC, Signal, Modulator, Function, Frequency, Receiver | PDF Full Text Request | Related items |
| |
|