| The emerging contaminants (ECs) such as estrogen hormones, perfluorinated compounds (PFCs), bisphenol A (BPA) and 1, 4-dioxane have been detected in natural water bodies at a noticeable level worldwide. The presence of ECs in the aquatic environment can pose potential threats to aquatic organisms as well as human world. Ion-exchange is a highly efficient technology for the removal of heavy metal ions and natural organic materials (NOMs) due to the nature of exchanging similar charged ions. However, this technology has not been explored for removing ECs.;In this study, four categories of ECs: estrogen hormones (12), perfluorinated compounds (10), bisphenol A and 1, 4-dioxane were used as model contaminants. The adsorption of each category of ECs onto various types of polymeric resins (MN100, MN200, A530E, A532E and C115) was investigated. The removal of ECs was tested under batch and column mode. The effects of pH, resin dosage, and contact time on the removal of ECs were studied in batch mode; isotherm and kinetics models were applied to fit the experimental data. Column experiments were conducted to verify the practicability of the polymeric resins. Adsorption results have shown that both MN100 and MN200 resins could efficiently remove estrogen hormones mixture (more than 95%), and bisphenol A (more than 80%) with the initial concentration of 100 µg/L; A532E and A530E could remove perfuorinated compounds mixture (more than 99%) with the initial concentration of 100 µg/L. As pH increased from 9 to 11, the adsorption capacity onto polymeric resins decreased dramatically for estrogen hormones such as 17α-ethinylestradiol, estriol, 17β-estradiol, 17α-estradiol, estrone, 17α-dihydroequilin and equilin as well as bisphenol A. The adsorption of estrogen hormones and bisphenol A onto MN100 and MN200 resins reached the equilibrium within 24 hours, whereas the adsorption of perfluorinated compounds onto A532E and A530E reached the equilibrium within 8 hours. It was also observed that the adsorption of PFCs largely depends on the C-C chain length. PFCs with longer chain yielded lower adsorption efficiency onto the ion-exchange resins A532E and A530E. Adding salinity decreased the first-order rate constants for the adsorption of bisphenol A onto MN100 and MN200 resins. Fixed-bed column experiment results with estrogen hormones mixtures confirmed that the polymeric resins were good candidates in the removal of estrogen hormones. Trimegestone was the first compound detected in the effluent in the column test while 17β-estradiol, 17α-estradiol were the last. 80% of the exhausted resins (MN100 and MN200) by bisphenol A were regenerated by using pure methanol as regeneration solution. Polymeric resins were not effectively removing 1, 4-dioxane from the aqueous solution. |
