Canadian Advanced Nanospace eXperiment 7 (CanX-7) Mission Analysis, Payload Design and Testing

A deorbiting drag device is being designed and built by the University of Toronto Institute for Aerospace Studies/Space Flight Laboratory (UTIAS/SFL) to be demonstrated on the Canadian Advanced Nanospace eXperiment 7 (CanX-7) satellite. CanX-7 will address the growing issue of space debris by designing a drag sail device that will be demonstrated for cubesat-sized satellites. Mission analysis done to ensure the drag device functions properly and deorbits within the required lifetime is performed while varying different properties such as drag coefficient, effective drag area, and solar cycle variations. The design evolution of the device is documented and the chosen design, along with several stages of prototyping, is described. The individual components that make up the device are described as are preliminary numerical analyzes. Finally, the test plan required for the device is described with several deployment experiments and risk reduction tests documented.