Gas-Solid Two-Phase Flow - Globe Thesis

Keyword [Gas-Solid Two-Phase Flow] Result: 181 - 200 \| Page: 10 of 10
181.	Numerical Simulation Of Ultra High Speed Laser Cladding Of Fe Based Alloy
182.	Study On Flow Field And Grading Screening Performance Of Vertical Roller Mill Based On Gas-Solid Two-phase Flow
183.	Numerical Simulation Analysis Of The Split-type Third Stage Cyclone Separator In FCC
184.	Analysis Of The Flow Field And Magnetic Field In The Separation Chamber Of A Dry Permanent Magnet Drum Separator
185.	The Study On Motion Distribution And Deposition Law Of Indoor Fine Particles Under The Influence Of Near-wall Radiator
186.	Experimental Study On Deposition Law Of Coal And Rock Particles In Mining-induced Fracture
187.	Study On Dust Movement Law And Dust Reduction Method At The Discharge Port Of Coal Crushing Station
188.	Numerical Simulation And Engineering Design Of SCR System For Ship Exhaust
189.	Structure Optimization Of Gas-solid Mixer For Sepiolite Powder And Study Of Its Internal Two-phase Flow Characteristics
190.	Three-dimensional Numerical Simulation Of Gas-solid Flow Characteristics And Water Vaporization In A Powder-Particle Spouted Bed
191.	Numerical Simulation Of Cross-domain Flow And Heat Transfer In An Internally Heated Pneumatic Spouted Bed
192.	Investigation On Numerical Simulation Of Two-phase Vertical Jet Based On DES Model
193.	Three-Dimensional Simulation Of Gas-solid Mixing Behavior In Thermal Plasma Reactor For Coal Pyrolysis
194.	Numerical Simulation On Spray Drying Of Oilfield Auxiliary Chemical
195.	CFD-DEM Simulation Of Gas-Solid Flow In Transfer Chute
196.	Study On The Performance Of A Cyclone Separator With Volute Inlet Separating Caustic-Burned Magnesia Powder
197.	The Simulation Of The Design Of Rice Processing Equipment Based On The Mechanism Of Cutting Knife Roller
198.	Impulse-Cyclone Airflow Drying Process For Wood Fiber And Optimization Of Impulse Tube Transition Angle
199.	Numerical Study On Gas-particle Two-phase Flow In The Upper Respiratory Tract Of Human Body
200.	Study On Flow Field And Slag Removal Efficiency Of Air Flush Drilling For Vertical Shaft Boring Machine
<<First <Prev Next> Last>> Jump to