High-temperature Furnace Distributor Motion Simulation And Strength Analysis

This article analyzes characteristics and shortcomings of the PW type, BT type, BG type, universal section-type distributor. Co-sponsored a new distributor with a company. The distributor is the core component of the high-temperature furnace, therefore, ensure the normal operation of the distributor is the premise of ensuring the normal working of the high-temperature furnace. In order to ensure the normal operation of the high-temperature furnace distributor(namely:does not exist dead during exercise of the high temperature furnace fabric distributor,the structural strength of the high-temperature furnace to meet the forms of exercise of the high-temperature furnace distributor),the following aspects:The movement and dynamic simulation based on the pro/e. The simulation is to divided the sports curve into several equal parts,each part instead of a straight line.Changing two hydraulic cylinder stroke,making the movement of the center of the bottom of the distributor accord to provisions track(35°ring curve, transition curve of29°ring to35°ring, straight line of the center to35°ring).Then, form a chute equations of motion. Last, measure the coordinate values of the critical point, measure the force of anchor, Laying the groundwork for the matlab simulation and ansys simulation next step.The mathematical simulation based on the matlab. The simulation is to obtain the control equation of two hydraulic cylinders.Obtain coordinates equation of the key points through mathematical modeling, respectively on hydraulic cylinder stroke and chute swing angle, measure the distance between two points through pro/e simulation, establish relationship of the hydraulic cylinder travel and the distance between two poins of the rotating chute and angular of the distributor. Simulate the relationship equation of the distance between two points and the angular of the distributor then, Thus to establish the relationship between the hydraulic cylinder stroke and tilt angle of the distributor.Structure strength calculation based on the ansys. Due to the complexity of the institutional structure, strength calculation of hazardous components, provide a basis for structural design, ensure the structural strength to meet the movement requirements.