The Research On Wood Furniture Design Based On Recycling

With the development of people's living standards, accelerate the replacement of wooden furniture, which brings tremendous pressure to the limited forest resources. In such case, it must be the best way to take full advantage of limited timber resources by the recycling of wood furniture. Based on the analysis of scrap wood furniture, recycling characteristics of paper studies to facilitate the recycling of wooden furniture design.In this article, we attempted to divide wood furniture into solid wood furniture and panel furniture. General performance of solid wood furniture for the integral frame structure, easy disassembly, recycling and reuse practices are usually refurbished; panel furniture hardware board structure with a certain degree of bonding achieved removable, and its panels and components can be further Recycled.To achieve selection of wood furniture should start recycling. Solid wood furniture, the substrate should be selected from a wide range of fast-growing forest timber, supported by bamboo and rattan and other materials. These materials become useful short, resources are relatively rich in added value to enhance a large space, and the recycling process more simple, more used to make artificial boards; panel furniture plates should be used green, environmentally friendly new composite plate. Wood furniture is designed to facilitate the key to recycling. Under the premise of meeting the functional, product modeling should be as simple as possible. Complex decorative removable parts can be designed independent units, to facilitate future recycling. Surface decoration should reflect the easy to fix, easy to remove the principle. Solid wood furniture should be designed as far as possible in a small volume, easy to use and then reinforced, removable structure; component modular design and standardized design, modular design and interchangeability of parts design, structural design and other means are removable Conducive to product recycling. Furniture back chair, chair legs, rails, door furniture, cabinets, shelves, bed furniture bed screen, bed board and other key parts of the interchangeable wearing parts, is conducive to product recycling.