Research On The Improvement Of 500kV Substation Process Standardization

Since the reform and opening up, the economic of China construction has made great progress, at the same time, the electric power enterprise development and industry standards are continuously updated. The last standardization process book is 2010 version, the standardization process in which a detailed description of the current development situation of the electric power construction itself and the construction standard. However, it is precisely because of the social progress, the material requirements and the formation of the results, there is a need for more accord with the standard of the development of practice, so the author thinks that the standardization process although already quite comprehensive, but there are still not just as one wishes place, in combination with standard process, based on the theory of life cycle cost management, this paper carried out for a comprehensive analysis of the entire 500 k V substation of standardization process, trying to find the relative areas in need of improvement in. This paper mainly researches from the electrical and civil, in the actual process of standardization process of operation, optimization of principle scheme, to minimize the total cost of life cycle principle for reference, as on the standardization process was improved.This paper takes the standardization process and life cycle cost management theory, this paper expounds the present situation of the standardization process of 500 k V substation and analyzes the shortcomings of existing standardization process, combined with the problems existed in practice based on existing standardization process, from safety, standardization, economic, operational angle on the process design optimization scheme, combined with the implementation of the development of technology standards, durability, unity, strict construction and advanced technology of a few principles made a comparative analysis of the optimization scheme, implement and standard optimization scheme of standardization process of substation of the planning is also predicted and analyzed on the effect of.Overall, this paper is based on the study of saving resources, reduce the standardization process development is based on the cost of the process of power construction in the present, in the life cycle cost management as the guiding ideology and means, in order to use social resources better and faster, and create more value.