Font Size: a A A
Keyword [Microhardness]
Result: 181 - 200 | Page: 10 of 10
181. Study On Microstructures And Properties Of Aluminum-steel Fusion-brazing Joint By Laser
182. Study On Microstructure And Microhardness Of Heat-affected Zone Of Quenched And Tempered Steel In Open Arc Swing Bead Welding
183. The Study On Plasma Spraying Preparation Process Of Iron-based Amorphous Alloy Coating And Its Properties
184. A Study On The Repairing Technology For Rotor Journal Of1.5MW Wind-power Generator By Laser Cladding
185. The Microstructure And Property Of Plasma Spray Welding Fe-Based Alloy Layers On Grey Cast Iron
186. The Research On Organization And Performance Of Cast Piston Aluminum Friction Stir Processing
187. Study On Microstructure And Technology Properties Of Electric Spark Surfacing Welding Of Die Casting Magnesium
188. Solid Boronizing Of Titanium Surface And The Study Properties Of Boronizing Layers
189. Investigation Microstructure And Properties Of Plasma Sprayed Coating On Cast Iron Roller Surface
190. The Preparation And Performance Analysis Of Cu/Ni And Cu/Ag Metal Multilayers
191. Microstructural Characterizations And Mechanical Behavior Of Veined Rapa Whelk Shells
192. The Investigation Of Mechanical Alloying Method To Prepare Amorphous Ti-Cu/Ti-Cu-Al Coatings
193. Research And Analysis Of Ni-based Coating By High Frequency Induction Cladding
194. Investigation On Processing, Microstructure And Mechanical Properties Of Bulk Nanostructured/Ultra-Fine Grained Aluminum
195. A Study On Weld Seam Composition And Properties During Deep Penetration Laser Welding Of Aluminum Alloy
196. Laser Combining Of Ni-Al Alloy And The Influence Doped B And Tungsten Concentrates Power
197. Study On Preparation Of Aluminum Base Amorphous Alloy Coating By Laser Cladding
198. Research On Weldability Of Dissimilar Joint Of Austenitic Stainless Steel And Low Alloy Steel
199. Effects Of High Pressure And Cooling Rate On The Solidiifed Microstructures And Mechanical Properties Of Zn-Al Alloy
200. The Microstructure And Performance Of High-Entropy Alloys Alx CoCrFeNiTi0.5
  <<First  <Prev  Next>  Last>>  Jump to